Medical oxygen generator
1-8 m3/hOutlet pressure
90, 93, 95 %Operating time
9-81 m3/hOutlet pressure
90, 93 ,95 %Operating time
Produce gaseous oxygen from compressed air on-site and have a cost-effective, reliable, and safe alternative to traditional oxygen gas supplies such as cylinders or cryogenic liquid. Our systems are made for 24/7 operation. Each generator is equipped with automatic start & stop, allowing the generator to vary the amount of oxygen produced, depending on the consumption.
A PSA Oxygen Generator consists of two pressure vessels, filled with a zeolite molecular sieve. Clean and dry compressed air enters the active vessel and flows through the zeolite. Nitrogen and other unwanted gases are adsorbed while the purified oxygen flows through. When the active vessel reaches full pressure, the flow stops and that vessel becomes inactive, enabling the trapped gases to purge during depressurisation. To ensure a steady flow of oxygen, each generator is built from two vessels; one is in an active cycle and the other is in an inactive cycle. At the end of each vessel's cycle, they switch roles - one to produce, the other to purge.
Control system with SIEMENS color touch panel
Molecular sieve moisture protection
Automatic start / stop
Built in purity analyser for continuous monitoring
Reliable - built for uninterrupted operation
Designed for dynamic pressure loading
Robust Design using Stainless Steel Piping (AISI316)
Data logging (saved on memory card)
Audio / visual alarm
GSM modem (remote start / stop, SMS status, alarm warning SMS)
VPN access from PC or smartphone
Flow meter with totaliser
Oxygen Dew Point Sensor
Modbus TCP / IP connection
Are you interested?
Jersey’s Nightingale Hospital gets OXYWISE’s flagship oxygen generator to fight CoronavirusRead
Look here for answers to some of the most common questions
For a quick and easy calculation, add together the power consumption of each component, for a total power requirement for the system. This figure is the hourly electrical consumption of your system (given in kW).
Multiple this figure with your electricity cost per kW/h, this is the hourly electricity cost for the system to operate.
Take this figure and divide it by the flow rate of the generator, to give a production cost per m3.
Total power consumption = 23.34kW
Local electricity cost = €0.0733 per kWh
Generator flow rate = 15.9m3/h
23.34(kW) * 0.0733(€) = €1.710822 per hour
1.710822 (€) / 15.9 (m3/h) = €0.11 per m3
Cost per m3 = €0.11
The start-up also includes a basic training of the operators on site.
Our service team will give you support and all necessary information.